Third-Party ISO Certification Body in UK, Europe, UAE, MENA & Globally. (MENA HO: UAE)
+971509014927 scs@scscertification.com Dubai, United Arab Emirates
SCS KNOWLEDGE CENTRE

ISO Certification Bodies in UAE for Manufacturers

Compare ISO certification bodies in UAE for manufacturers. Check EIAC accreditation, certification scope, costs and major industrial locations.

  1. Home
  2. Knowledge Centre
  3. ISO Certification Bodies in UAE for Manufacturers
ISO Certification

Top 10 ISO Certification Bodies in UAE for Manufacturing Companies

14 Oct 2026 ISO Certification
Top 10 ISO Certification Bodies in UAE for Manufacturing Companies
Compare 10 ISO certification bodies for manufacturing companies in the UAE. Review provider-selection criteria, EIAC accreditation checks, relevant standards, costs and major industrial locations.

Top 10 ISO Certification Bodies in UAE for Manufacturing Companies

Manufacturers choosing an ISO certification body in the United Arab Emirates need to consider more than the quoted price. The right choice depends on the required management-system standard, the scope of certification, applicable accreditation, audit competence and the requirements of customers or authorities that will receive the certificate.

This guide compares 10 certification bodies for manufacturing companies researching their options in the UAE. It is designed for factory owners, quality managers, operations teams, procurement professionals and industrial businesses that want to evaluate providers before requesting a quotation.

Unlike a general ISO certification guide, this article focuses on how manufacturing companies can compare certification bodies. For businesses already looking for certification services, the dedicated ISO certification for manufacturing companies in UAE page remains the relevant service destination.

Comparison Table: Top 10 ISO Certification Bodies in UAE for Manufacturing Companies

The following list follows the requested editorial order. It is not an independently verified ranking of provider quality, manufacturing expertise or market share.

No. Certification body What manufacturers should verify
1 Veritas Assurance Legal identity, required certification services, applicable accreditation and scope
2 BSI Relevant management-system certification services, audit arrangements and applicable scope
3 Gabriel Registrar Availability of the required standard, accreditation status and certificate-issuing entity
4 LRQA (Lloyd's Register) Relevant certification services, audit competence and certification arrangements
5 SCS Certification Required standards, manufacturing activities, proposed scope and applicable accreditation
6 TÜV SÜD Relevant certification offering, audit arrangements and applicable accreditation
7 Bureau Veritas Certification scope, applicable accreditation and audit arrangements
8 DNV Required management-system certification services, scope and audit arrangements
9 NQA Service availability, applicable accreditation and arrangements for the intended locations
10 SGS Required certification services, accreditation and proposed certification scope

How to use this table: Treat it as a shortlist for further evaluation, not as proof that each provider holds EIAC accreditation for every standard or manufacturing activity. Verify the relevant legal entity, current services, accreditation and scope before appointing any certification body.

How Manufacturing Companies Should Compare Certification Bodies

A manufacturer should first establish what the certificate needs to demonstrate. A business seeking to improve production consistency may have different priorities from a factory whose customer has specified a particular accreditation or standard.

Use the following criteria when requesting proposals.

1. Required ISO standard

Identify the standard required by your customer, business objectives or applicable obligations. Do not request quotations for several standards unless you have a reason to consider them.

2. Accreditation and certificate acceptance

Check whether the intended certificate must be issued under a particular accreditation arrangement. If EIAC accreditation is specified, verify the relevant certification body and scope.

3. Manufacturing activities and certification scope

Explain what the factory produces, which processes it performs and which locations need to be covered. The proposed scope should accurately reflect the intended activities.

4. Audit competence

Ask how the audit team will establish competence for the relevant management system and manufacturing activities.

5. Total certification cost

Compare the initial audit, surveillance, recertification, travel and any additional site or scope-related fees. Review the complete certification cycle rather than only the first quotation.

6. Certificate maintenance

Confirm the applicable surveillance schedule, recertification arrangements and process for managing changes to the company's sites, activities or scope.

These checks allow manufacturers to compare providers on relevant criteria without relying on unsupported claims about which organization is universally the best.

EIAC Accreditation: What UAE Manufacturers Need to Check

The Emirates International Accreditation Centre (EIAC) is an important accreditation reference for organizations operating in Dubai and the wider UAE market. Some customers, authorities or procurement requirements specify an EIAC-accredited certification body. Where this condition applies, manufacturers should verify it before selecting a provider.

Official directory: https://eiac.gov.ae/directory/

Before proceeding, check:

  • Legal entity: Confirm the organization that will issue the certificate.

  • Current status: Verify the accreditation record rather than relying solely on marketing material.

  • Required standard: Confirm that the accreditation covers the relevant ISO standard.

  • Scope: Review the applicable scope and any limitations.

  • Acceptance requirements: Check the conditions imposed by the customer, tender or authority receiving the certificate.

EIAC accreditation should not be assumed for every provider, standard or certification activity. Nor should a manufacturer assume that accreditation under one standard automatically covers another.

A certificate's acceptance depends on the applicable requirements of the receiving organization. Where a particular accreditation is mandatory, confirm that requirement directly before signing a certification agreement.

Manufacturing Standards to Consider

This section identifies standards that may be relevant to manufacturers. It is not a substitute for the requirements of the individual standard or a detailed standard-specific certification guide.

Standard Potential manufacturing application
ISO 9001 Quality management, production consistency and customer requirements
ISO 14001 Environmental aspects, waste and resource management
ISO 45001 Occupational health and safety management
ISO 50001 Energy management and energy performance
ISO 22000 Food safety management for relevant food-sector operations
ISO 13485 Quality management for applicable medical-device activities
ISO 27001 Information security for relevant business and production information
ISO 22301 Business continuity management
ISO 37001 Anti-bribery management
ISO 37301 Compliance management

A factory does not automatically need every standard listed. Select the standards that match its activities, customer expectations and applicable requirements. For further information on a specific standard, use the relevant SCS standard-specific article rather than duplicating a full provider comparison here.

Manufacturing Industries Covered by This Comparison

The selection process can apply to many types of UAE manufacturing businesses, including:

  • Food and beverage processing

  • Plastics and polymer products

  • Steel manufacturing and metal fabrication

  • Packaging, printing, cartons and labels

  • Cement, concrete and construction materials

  • Electronics and electrical equipment

  • Machinery and industrial equipment

  • Chemicals, coatings and paints

  • Pharmaceutical and medical-device manufacturing

  • Textiles, garments and fabrics

  • Furniture, wood and paper products

  • Automotive components and transport equipment

  • Glass, ceramics and insulation materials

  • Industrial engineering and assembly

  • Consumer goods and household products

Each industry has different processes and risks. The manufacturer's actual activities should determine the certification scope and the competence required for the audit.

Major Industrial Cities, Areas and Free Zones Across UAE

Manufacturers operating in different emirates can use the same provider-selection criteria, while confirming that the proposed certification arrangements cover the correct locations and activities.

The following is a practical list of major industrial and manufacturing locations, not a complete directory of every industrial estate in the country.

Dubai

  • Dubai Industrial City

  • Jebel Ali Free Zone (JAFZA)

  • National Industries Park

  • Dubai Investments Park (DIP)

  • Al Quoz Industrial Areas

  • Ras Al Khor Industrial Area

  • Al Qusais Industrial Area

  • Other designated industrial and manufacturing districts in Dubai

Abu Dhabi and Al Ain

  • Industrial City of Abu Dhabi (ICAD)

  • Khalifa Economic Zones Abu Dhabi (KEZAD)

  • Mussafah Industrial Area

  • Al Ain Industrial City

  • Other industrial and manufacturing locations across Abu Dhabi emirate

Sharjah

  • Hamriyah Free Zone

  • Sharjah Airport International Free Zone (SAIF Zone)

  • Sharjah Industrial Areas 1–18

  • Sajaa industrial district

  • Other manufacturing areas in Sharjah

Ajman

  • Ajman Industrial Area

  • Ajman New Industrial Area

  • Ajman Free Zone

  • Other industrial locations in Ajman

Ras Al Khaimah

  • Ras Al Khaimah Economic Zone (RAKEZ)

  • Al Ghail Industrial Area

  • Other manufacturing and industrial locations in the emirate

Fujairah

  • Fujairah Free Zone

  • Fujairah Industrial Area

  • Other relevant industrial locations in Fujairah

Umm Al Quwain

  • Umm Al Quwain Free Trade Zone

  • Umm Al Quwain Industrial Area

  • Other manufacturing and industrial locations in the emirate

A company's location does not, by itself, determine which ISO standard it requires or whether a particular accreditation is mandatory. Confirm the relevant conditions with the customer, authority or organization that will receive the certificate.

ISO Certification Costs for Manufacturing Companies

Certification costs vary according to the standard, workforce, production complexity, number of sites, audit duration and applicable certification arrangements.

When comparing quotations, ask each provider to clarify:

  • The standards and activities included

  • The proposed certification scope

  • The number of sites covered

  • Initial audit and certification fees

  • Surveillance and recertification costs

  • Travel or additional audit charges

  • Any exclusions or additional services

A lower initial price may not represent the lowest total cost over the certification cycle. Compare like-for-like proposals and make sure each provider has quoted for the same scope.

Consultancy, training and independent certification are different services unless a written proposal explicitly states otherwise. Ask for clarification if you need implementation support in addition to certification.

How to Request a Manufacturing ISO Certification Quotation

Before approaching a certification body, prepare the following information:

  1. Company name and primary contact.

  2. Manufacturing activity and product categories.

  3. Emirate, industrial area or free zone.

  4. Employee count and shift arrangements.

  5. Number of manufacturing sites.

  6. Required ISO standard or standards.

  7. Existing certifications, if applicable.

  8. Customer, tender or regulatory requirements.

  9. Any specified EIAC accreditation requirement.

Providing this information helps the provider understand the proposed scope and identify what is needed to prepare a relevant quotation.

Discuss Your Manufacturing Certification Requirements with SCS

If your company is evaluating ISO certification, you can contact SCS Certification to discuss the required standards, manufacturing activities, intended scope and applicable accreditation requirements.

Manufacturing service page:
https://www.scscertification.com/iso-certification-for-manufacturing-companies-uae.php

Contact and quotation enquiries:
https://www.scscertification.com/contactus.php

When enquiring, include your manufacturing location, product categories, employee count, number of sites and required standard. If your customer or tender specifies EIAC accreditation, identify that requirement at the outset.

Disclaimer: This is an editorial comparison, not an official ranking or endorsement. Verify each provider's current services, legal identity, accreditation and scope, and confirm certificate acceptance with the relevant customer or authority.

Share this article
SYSTEM CERTIFICATION SERVICES

Need ISO Certification for Your Business?

Speak with our certification specialists to understand certification requirements, audit process, implementation timelines and accredited certification services.

FREQUENTLY ASKED QUESTIONS

Frequently Asked Questions

This editorial comparison lists Veritas Assurance, BSI, Gabriel Registrar, LRQA, SCS Certification, TÜV SÜD, Bureau Veritas, DNV, NQA and SGS. Verify each provider's current services, legal identity and accreditation before appointment.
Compare the required standard, applicable accreditation, certification scope, audit competence, quotation, surveillance arrangements and customer acceptance requirements.
It is important where a customer, authority or procurement requirement specifies EIAC accreditation. Verify the applicable scope before choosing a certification body.
Check the official EIAC directory at https://eiac.gov.ae/directory/ and verify the relevant legal entity, accreditation status and scope.
No. Accreditation differs between providers, standards and scopes. Confirm the specific accreditation relevant to your intended certification.
No. Acceptance depends on the tender's specific conditions and the applicable certification and accreditation requirements.
Manufacturers often evaluate ISO 9001, ISO 14001, ISO 45001 and ISO 50001. Other standards may be relevant depending on the industry and customer requirements.
ISO 9001 may help factories manage quality, production controls, supplier performance and continual improvement.
ISO 14001 provides a framework for managing environmental aspects such as waste, resource consumption and pollution prevention.
It supports occupational health and safety management, including hazard identification, risk assessment and workplace controls.
Yes, subject to the applicable certification arrangements. Confirm the scope, audit programme and accreditation for each standard.
It may be useful for manufacturers seeking a structured approach to energy performance and improvement.
ISO 22000 may be relevant to food safety management. Additional regulatory and customer requirements may apply.
ISO 13485 may be relevant, subject to the manufacturer's activities, products and applicable regulatory requirements.
Yes. They can evaluate applicable standards based on their production processes, customer requirements and business objectives.
ISO 9001, ISO 14001, ISO 45001 and ISO 50001 may be relevant depending on the operation and its objectives.
Yes. ISO 9001 may support quality management across packaging production, inspection and supplier controls.
Manufacturers may consider quality, environmental, occupational health and safety or information security standards, depending on their activities.
Yes. The appropriate standard depends on the production processes, environmental aspects, workplace risks and customer requirements.
They may consider quality, environmental, safety and energy management standards, depending on their production activities.
Costs depend on the standard, employee count, production complexity, number of sites, audit duration and applicable certification arrangements.
Provide the manufacturing activity, employee count, sites, shifts, required standards and any customer or accreditation requirements.
The timeframe depends on management-system readiness, operational complexity, audit availability and any findings that need to be addressed.
Not universally. Requirements may arise from particular customers, contracts, tenders, regulations or industry obligations.
It may support supplier evaluation where the buyer requires the relevant certification, but it does not guarantee supplier approval.
No. Certification assesses a management system against a standard. Product quality also depends on operational controls and applicable product requirements.
Multi-site certification may be possible where applicable rules permit it. Confirm which sites and activities will be covered.
Each standard requires an appropriate certification decision. Separate certificates or integrated audit arrangements may be possible where permitted.
A consultant supports implementation or improvement. A certification body independently audits the management system and makes the certification decision.
Check the issuing entity, certificate number, validity, scope and applicable accreditation through the provider and relevant accreditation records.
A transfer may be possible subject to applicable transfer rules, certificate status and the receiving body's review.
Review certificate validity, surveillance and recertification dates, changes to scope or sites and updated customer requirements.
Yes. They can pursue applicable management-system certification for their defined activities, subject to the relevant requirements.
Depending on their activities, manufacturers may consider quality, environmental, occupational health and safety or energy management standards.
Yes. The applicable standard and scope should reflect the company's actual manufacturing activities and customer requirements.
Examples include Dubai Industrial City, JAFZA, National Industries Park, Dubai Investments Park, Al Quoz, Ras Al Khor and Al Qusais Industrial Area.
Yes. They can evaluate applicable standards according to their manufacturing operations and intended certification scope.
Yes. Manufacturers in these Abu Dhabi industrial locations can assess relevant standards and certification requirements.
Examples include Hamriyah Free Zone, SAIF Zone, Sharjah Industrial Areas and industrial districts around Sajaa.
Yes. They can evaluate certification requirements according to their operations, customer expectations and intended scope.
Manufacturers may consider relevant quality, environmental, occupational health and safety or energy management standards, depending on their activities.
Yes. Applicable certification depends on the company's operations, selected standard and relevant certification requirements.
Yes. They can assess suitable management-system standards for their production activities and intended certification scope.
The appropriate standard depends on the business and intended use of the certificate. Customer, contractual, regulatory or zone-specific conditions may also apply.
Include it when it forms part of the intended scope and the applicable certification arrangements cover the location and activities.
Outsourced processes may need to be controlled under the applicable standard. The organization remains responsible for relevant controls and requirements.
One provider may simplify coordination, but verify accreditation, scope, audit competence and cost for each standard.
Check the standards, scope, sites, audit arrangements, initial fees, surveillance and recertification costs, and any exclusions.
Define the scope early, provide accurate information, implement the management system and address audit findings promptly.
Contact SCS Certification at https://www.scscertification.com/contactus.php. Include your manufacturing activity, location, required standard and any specific accreditation requirements.
YOU MAY ALSO LIKE

Related Articles