CE Marking Certification in Saudi Arabia: Requirements, Process & Cost
★★★★★ CE Marking Support in Saudi Arabia
SCS Certification (Partners)
7713, King Abdulaziz Street,
Al Dawasir, Dammam, 32416
Kingdom of Saudi Arabia
Phone: +966 58 245 8722
CE Marking Certification Enquiries:
Submit an enquiry through the SCS contact page.
Manufacturers and exporters in Saudi Arabia often come across CE marking when preparing products for European customers, distributors or international projects.
The process, however, is not simply about obtaining a document and putting the CE logo on a product.
The correct route depends on the product, its intended use, the European legislation that applies to it, relevant standards and the conformity assessment procedure required.
For a Saudi manufacturer, getting these points right at the beginning can save time later. It can also prevent problems with technical files, testing, customer acceptance and export arrangements.
SCS supports manufacturers, exporters and industrial businesses with CE conformity assessment for applicable product categories, including construction products, machinery, elevators and other regulated products.
There is another distinction Saudi businesses need to understand. CE marking and Saudi product conformity are not the same thing.
Products placed on the Saudi market may be subject to Saudi technical regulations and conformity procedures, including applicable processes through the Saber platform.
What Is CE Marking?
CE marking is used for products covered by applicable European Union legislation.
It shows that the manufacturer has addressed the requirements that apply to the product and completed the relevant conformity assessment procedure.
The procedure is not identical for every product.
Depending on the product, the assessment may involve:
- Applicable EU legislation
- Harmonised standards
- Product testing
- Risk assessment
- Technical documentation
- Factory production controls
- Product inspection
- Quality-system assessment
- Third-party conformity assessment
- EU Declaration of Conformity
- CE marking and labelling
Some products can follow a manufacturer-led assessment route. Other products require independent assessment by a notified body.
That is why businesses searching for CE certification in Saudi Arabia should first establish the correct regulatory route for the product rather than selecting a generic certificate package.
Is CE Certification Required in Saudi Arabia?
CE marking is primarily connected with European market access. It is not a general Saudi government product certification.
A Saudi manufacturer therefore needs to consider two different questions:
What requirements apply when the product is placed on the Saudi market?
and
What requirements apply when the product is exported to Europe?
These questions should be assessed separately.
Saudi Arabia has its own product conformity framework. Applicable products may need to be registered and assessed through the relevant Saudi conformity procedures and Saber platform.
A Saudi manufacturer exporting a product to Europe may therefore need to satisfy the applicable European CE requirements while also considering Saudi requirements applicable to the product's manufacture or domestic sale.
Which Products May Need CE Marking?
CE marking applies to product categories covered by specific European legislation.
Depending on the product, relevant legislation may include:
- Machinery Directive 2006/42/EC
- Low Voltage Directive 2014/35/EU
- Electromagnetic Compatibility Directive 2014/30/EU
- Pressure Equipment Directive 2014/68/EU
- Lifts Directive 2014/33/EU
- Marine Equipment Directive 2014/90/EU
- Medical Device Regulation (EU) 2017/745
- ATEX Directive 2014/34/EU
- RoHS Directive 2011/65/EU
- Construction-product legislation and applicable harmonised technical specifications
- Other applicable European product legislation
One product can fall under more than one legislative requirement.
For that reason, product classification is one of the first things that should be checked during a CE assessment.
CE Marking Certification in Saudi Arabia: How the Process Works
There is no single CE checklist that works for every product. The assessment route needs to follow the legislation applicable to the product.
1. Identify the Product and Intended Use
Start with the actual product.
Important information can include:
- Product name
- Model numbers
- Intended use
- Operating conditions
- Technical characteristics
- End-user application
- Manufacturing location
- Target market
A lift, for example, will not follow the same route as construction insulation or industrial machinery.
2. Determine the Applicable EU Legislation
The next step is to identify the European legislation covering the product.
This may require consideration of:
- Product category
- Intended use
- Safety risks
- Technical characteristics
- Materials
- Components
- Operating environment
- Applicable European standards
Correct identification at this stage makes the rest of the assessment much easier to manage.
3. Select the Conformity Assessment Route
Different European laws specify different conformity procedures.
Depending on the product, the process may include:
- Manufacturer assessment
- Product testing
- Technical-file review
- Factory assessment
- Product examination
- Production controls
- Quality-system assessment
- Independent third-party assessment
Where notified-body involvement is required, the body must have the appropriate designation and scope for the conformity assessment activity.
4. Prepare Technical Documentation
The manufacturer needs evidence showing how the product meets the applicable requirements.
This can include:
- Product specifications
- Technical drawings
- Design calculations
- Risk assessment
- Bill of materials
- Test reports
- Inspection records
- Applied standards
- Manufacturing information
- Installation instructions
- Operating manuals
- Quality-system documentation
- Product photographs
- Previous assessment reports
5. Complete the Conformity Assessment
SCS reviews the product and available technical information against the applicable assessment procedure.
Depending on the product, the assessment may include technical documentation review, product evaluation, factory assessment, inspection, quality-system assessment or other activities required by the relevant legislation.
6. Complete the Required Certification Documentation
Once the applicable conformity requirements have been addressed, the required documentation can be completed.
The manufacturer remains responsible for continuing product conformity and for using the CE marking correctly.
Where a notified body is involved, its identification number is used with the CE marking where required by the applicable conformity route.
SCS as a CE Conformity Assessment Body
SCS supports manufacturers and exporters seeking CE conformity assessment for applicable products.
For relevant conformity assessment activities, SCS provides Notified Body services under NB No. 2835 (EU-ASIB), subject to the applicable designation and scope.
SCS certification work covers different European regulatory areas, including construction products, machinery, elevators and other regulated product categories.
The correct assessment route always depends on the product and the legislation that applies.
SCS Accreditation for Product Certification
SCS is accredited by Accred Services International Board (Europe) under PCB601 for ISO/IEC 17065:2012 – Conformity assessment — Requirements for bodies certifying products, processes and services.
ISO/IEC 17065 establishes requirements for bodies carrying out product, process and service certification.
For product conformity assessment, the framework is important because it addresses areas such as competence, impartiality and consistent certification processes.
The applicable accreditation, designation and scope should always be checked against the specific conformity assessment activity.
CE Marking and Voluntary Acceptance in Europe
CE marking should not be confused with a general quality label.
Where a product is covered by mandatory European CE legislation, compliance with that legislation is a market-access requirement.
There can also be situations where a manufacturer seeks independent conformity assessment because a customer, distributor, tender or commercial partner wants additional evidence of product conformity.
For Saudi manufacturers selling into Europe, this can be particularly useful when dealing with international procurement teams that ask for technical evidence before approving a supplier.
SCS CE Marking Certification Clients in Saudi Arabia and the Middle East
SCS has supported organizations working with different European product regulations and conformity requirements.
Examples include:
- Saudi International Insulation Manufacturing Co. (SIIMCO) — Construction Product Regulation (EU) No 305/2011
- Alaa Al Jazeera Co. for Elevators & Escalators W.L.L. — Directive 2014/33/EU
- Saudi Rockwool Factory Co — Construction Product Regulation (EU) 305/2011
- Traverse International Insulation Materials LLC — Construction Product Regulation (EU) 305/2011
- Team Switchgear & Control LLC — Directive 2014/34/EU
- Rollstud Middle East Inc. — Construction Product Regulation (EU) 305/2011
- Unique Group FZE — Directive 2014/90/EU on Marine Equipment
- Al Nawras Steel — Machinery Directive 2006/42/EC
- Trinity Mechanical Services LLC — Low Voltage Directive 2014/35/EU and Machinery Directive 2006/42/EC
- Specialized Factory for Steel Products — Construction Product Regulation (EU) 305/2011
- Almasa Environmental Industries LLC — Construction Product Regulation (EU) 305/2011
- Michelle Engineering Co LLC (Sole Proprietorship) — Machinery Directive 2006/42/EC
- Abronn FZE — Machinery Directive 2006/42/EC, vehicle and machinery products, and MDR EU 2017/745
These examples demonstrate the range of European product legislation that may be involved in CE conformity assessment.
Current CPR note: The client references to Regulation (EU) No 305/2011 should remain tied to the certificates issued under that regulation. The EU's new Construction Products Regulation, Regulation (EU) 2024/3110, applies from 8 January 2026 and includes transitional provisions for certain existing CPR documents and technical bases.
CE Marking Services Across Saudi Arabia
SCS supports manufacturers, exporters, industrial suppliers and businesses seeking CE conformity assessment across Saudi Arabia.
Riyadh
Riyadh is one of the Kingdom's major business, technology and industrial centres.
CE requirements may be relevant to manufacturers, engineering companies, exporters, machinery suppliers, electrical-product manufacturers and businesses serving European customers.
Jeddah
Jeddah is a major commercial, logistics and industrial centre.
Businesses involved in manufacturing, construction products, engineering, trading and export can encounter European conformity requirements when supplying products to EU customers.
Dammam
Dammam has a strong industrial and manufacturing base.
CE conformity can be relevant to companies producing machinery, electrical products, industrial components and other regulated products for international markets.
Dhahran and Khobar
The Eastern Province includes major energy, engineering, technology and industrial activities.
Manufacturers and suppliers working with international customers may need to assess European product requirements before exporting.
Jubail
Jubail Industrial City is particularly relevant to industrial manufacturing, engineering and process industries.
Companies supplying machinery, industrial equipment, components and construction-related products may encounter CE requirements when supplying European markets.
Yanbu
Yanbu's industrial base includes manufacturing, engineering and process-related businesses.
Product conformity assessment can be important for companies supplying internationally.
NEOM and Saudi Economic Zones
Businesses involved in large-scale infrastructure, construction, technology, manufacturing and industrial projects may work with international customers and suppliers.
CE requirements should be assessed where products are intended for European markets.
SCS can support organizations across:
Riyadh, Jeddah, Dammam, Dhahran, Khobar, Jubail, Yanbu, Makkah, Madinah, Tabuk, Abha, Jazan, Al Ahsa, Taif, NEOM, King Abdullah Economic City (KAEC), Jazan Economic City and Ras Al-Khair Industrial City.
Why Choose SCS Certification for CE Marking?
Product-Specific Assessment
CE conformity is assessed around the actual product, its intended use and applicable European legislation.
Experience Across Product Categories
SCS has experience with different European regulatory areas covering products such as construction products, machinery, elevators, pressure equipment, marine equipment and electrical products.
Notified Body Capability
For applicable scopes requiring third-party conformity assessment, SCS provides Notified Body services under NB No. 2835 (EU-ASIB), subject to the relevant designation and scope.
ISO/IEC 17065 Framework
SCS operates product certification activities within its applicable ISO/IEC 17065 accreditation framework.
Saudi and International Support
The Saudi office gives local businesses a regional point of contact while SCS's wider international structure supports organizations working across different markets.
Documents Usually Needed for CE Assessment
Depending on the product, manufacturers may need to provide:
- Company details
- Manufacturer information
- Product description
- Product models
- Technical specifications
- Drawings
- Risk assessment
- Applicable standards
- Test reports
- Design information
- Manufacturing information
- Quality-system records where applicable
- Installation instructions
- Operating manuals
- Existing certificates
- Product photographs
- Technical file
- Declaration of Conformity where applicable
The exact document list should be established after the product and conformity route have been reviewed.
How Long Does CE Certification Take in Saudi Arabia?
There is no standard turnaround time.
The timeframe can depend on:
- Product complexity
- Number of models
- Applicable EU legislation
- Required testing
- Technical documentation
- Factory assessment
- Quality-system assessment
- Corrective actions
- Availability of technical evidence
A manufacturer with a well-prepared technical file may move through the process more smoothly than a company that needs to develop most of its documentation from the beginning.
CE Certification Cost in Saudi Arabia
There is no single CE certification price for all Saudi companies.
The cost can depend on:
- Product category
- Number of products/models
- Applicable legislation
- Testing requirements
- Technical-file complexity
- Factory assessment
- Quality-system assessment
- Number of locations
- Additional technical evaluation
For an accurate quotation, SCS should review the product, technical information, intended market and available test reports.
CE Certification in Saudi Arabia: What Manufacturers Should Avoid
Manufacturers should avoid:
- Applying the CE marking before completing the required conformity process
- Selecting the wrong EU legislation
- Treating CE as a generic certificate
- Using an assessment body without checking its applicable scope
- Maintaining an incomplete technical file
- Ignoring multiple applicable European requirements
- Assuming an old certificate automatically covers a modified product
- Confusing CE marking with Saudi conformity requirements
- Treating Saber and CE as the same certification process
- Selecting a provider based only on price
The safest approach is to establish the product classification and applicable conformity route before beginning certification.
Frequently Asked Questions
What is CE marking certification in Saudi Arabia?
CE marking certification refers to conformity assessment for products manufactured or supplied by Saudi businesses where applicable European Union product legislation requires CE marking.
Is CE certification mandatory in Saudi Arabia?
CE marking is not a general Saudi government certification. It becomes relevant when a product is covered by applicable European CE legislation, particularly when it is intended for the European market.
Can Saudi manufacturers obtain CE certification?
Yes. A Saudi manufacturer can complete the applicable CE conformity assessment process for products intended for European markets.
Is CE marking the same as Saber?
No. CE marking relates to applicable European requirements. Saber is part of Saudi Arabia's product conformity framework.
Does every CE product require a Notified Body?
No. Whether a notified body is required depends on the applicable European legislation and conformity assessment procedure.
Can SCS provide CE certification for machinery?
Yes, where the relevant conformity assessment activity falls within SCS's applicable designation and scope.
Can a product fall under more than one EU directive?
Yes. Some products need to satisfy several European legislative requirements at the same time.
Does ISO 9001 replace CE marking?
No. ISO 9001 certification concerns a quality-management system. CE marking concerns conformity of products with applicable European legislation.
How much does CE certification cost in Saudi Arabia?
There is no fixed price. The cost depends on the product, legislation, testing, technical documentation and assessment activities involved.
How long does CE certification take?
The timeframe varies according to product complexity, documentation, testing and the required conformity assessment route.
Can a Saudi company get CE certification if the product is manufactured in Saudi Arabia?
Yes. Products manufactured in Saudi Arabia can undergo the applicable European conformity assessment process when intended for a market covered by CE legislation.
Does CE marking replace Saudi product compliance?
No. Saudi requirements and European CE requirements are separate and should be assessed independently.
Can SCS help determine the applicable CE requirements?
Yes. SCS can review the product, intended use, technical information and available documentation to determine the appropriate conformity assessment pathway.
Final Word: Choose the Right CE Route Before You Mark the Product
For a Saudi manufacturer or exporter, CE marking should start with the product and the destination market.
The first question is not simply, “Where can I get a CE certificate?”
It is:
Which European requirements apply to my product, and what conformity assessment route do I need to follow?
Once that is clear, the manufacturer can prepare the right technical documentation, arrange the necessary testing and assessment, and complete the applicable conformity process.
For companies selling only in Saudi Arabia, the relevant Saudi technical regulations and conformity procedures should be considered separately.
For companies exporting to Europe, the applicable CE requirements need to be established before the product is placed on the European market.
SCS supports Saudi manufacturers, exporters and industrial businesses with product-specific CE conformity assessment for applicable European requirements.
Need CE Marking Certification in Saudi Arabia?
Get product-specific guidance on the applicable European requirements, documentation, assessment process, timeline and cost.
Button Text: Get a CE Certification Quote
Enquiry: https://scscertification.com/contactus.php
International Offices
UK Office
SCS CERTIFICATION EUROPE LIMITED
Office 6996,
58 Peregrine Road,
Hainault, Ilford, Essex,
United Kingdom IG6 3SZ.
Canada Office
SCS Certification (E) Limited
Oaklea Blvd,
Brampton, ON
L6Y 5A2, Canada.
Phone: +1 437 410 8055
UAE Office
SCS Certification
6th Floor Salaam Bldg,
Office 9 Al Marakib St,
Al Danah, Zone 1,
Abu Dhabi, UAE.
Phone: +971 50 302 4312
India Offices
Chennai
Building bearing No.19/35, V 270, Situated on First Floor,
Mount Road, Little Mount,
Chennai – 600015, India.
Bangalore
Bangalore, Karnataka, India.
Common Phone: +91 97903 25044
Need CE Mark Certification for Your Products?
Speak with our certification specialists to understand certification requirements, audit process, implementation timelines and accredited certification services.
